I struck out on getting FC10 on my iMac. Not that it couldn't be done, but I can't be arsed with that kind of effort for something that is basically just a hobby box. SO, I cut my losses and installed OS X 10.3. :-( Oh well, its still a pretty sweet little rig, all things considered.
Thursday, March 12, 2009
Thursday, March 5, 2009
FC10 on G3 iMac
Posted on 6:37 AM by Unknown
I did something rash today: I installed Fedora Core 10 on a G3 iMac. This was not accomplished without some difficulty -- and as near as I can tell, a substantial bit of luck. I hit a number of snags:
Okay, about the seven CD's. Yes, I know FC10 is available on DVD. Really, I do. However, my decrepid iMac only has a CD-ROM. SO, here's a thought: ship a base install that will get you a functional desktop without having to swap CD's like floppies of old. Holy crap.
My first attempts to fire-up X were thwarted by a missing xterm package. After carefully scouring each of the SEVEN discs, I discovered the xterm package was no where to be found. I downloaded it and installed it by hand. Not a big deal.
Unfortunately, missing xterm wasn't the biggest issue I've got with getting X going. The biggest issue is that the fbdev and ati driver do NOT work well with this chipset. I still have no graphical love. This is not so good. I've got ideas how to sort it out, but I can't get to those until I have more time.
- FC10's anaconda installer wouldn't run in graphical mode
- There isn't a documented way to launch the text mode
- Seven CD installation
- Missing `xterm` package
- botched X autodetection and FB install
Okay, about the seven CD's. Yes, I know FC10 is available on DVD. Really, I do. However, my decrepid iMac only has a CD-ROM. SO, here's a thought: ship a base install that will get you a functional desktop without having to swap CD's like floppies of old. Holy crap.
My first attempts to fire-up X were thwarted by a missing xterm package. After carefully scouring each of the SEVEN discs, I discovered the xterm package was no where to be found. I downloaded it and installed it by hand. Not a big deal.
Unfortunately, missing xterm wasn't the biggest issue I've got with getting X going. The biggest issue is that the fbdev and ati driver do NOT work well with this chipset. I still have no graphical love. This is not so good. I've got ideas how to sort it out, but I can't get to those until I have more time.
Requiescat en pacem, Maria Louise Meyer
Posted on 6:35 AM by Unknown
I remember the first day I met Louise: it was the fall of '02 and I was walking home from the grocery store, alone. I suspect most people remember the first day they met Louise. On Friday, February 27th, Louise was killed in a car accident.
I found out about the accident Friday afternoon, while driving home from a client site in Iowa -- Amanda, called and told me. I was stunned. The more I think about it, the more tragic her passing is. The thing that hits me the hardest is her two boys: August and
Leonard. I can't help but think about them even now.
Jerome, Louise's husband, is understandably devastated. I can't even fathom what he's going through. As selfish as it may sound, I think trying to empathize with Jerome is what really tore me up: the thought of losing my wife, my Queen, coupled with the thought of having to
raise the kids without her love and support is just incomprehensible to me.
I went over to see Jerome this morning, and to express my condolences and found myself surrounded by Louise's friends and family -- I was staggered to see so many people from so many different places and ways of life, all bound by their kinship or friendship with Louise, were
there.
I've never lost a friend like this, and though I know she won't be the last, I'll always remember her and how her passing affected me on a personal level.
Requiescat en pacem, Maria Louise Meyer.
I found out about the accident Friday afternoon, while driving home from a client site in Iowa -- Amanda, called and told me. I was stunned. The more I think about it, the more tragic her passing is. The thing that hits me the hardest is her two boys: August and
Leonard. I can't help but think about them even now.
Jerome, Louise's husband, is understandably devastated. I can't even fathom what he's going through. As selfish as it may sound, I think trying to empathize with Jerome is what really tore me up: the thought of losing my wife, my Queen, coupled with the thought of having to
raise the kids without her love and support is just incomprehensible to me.
I went over to see Jerome this morning, and to express my condolences and found myself surrounded by Louise's friends and family -- I was staggered to see so many people from so many different places and ways of life, all bound by their kinship or friendship with Louise, were
there.
I've never lost a friend like this, and though I know she won't be the last, I'll always remember her and how her passing affected me on a personal level.
Requiescat en pacem, Maria Louise Meyer.
Wednesday, February 11, 2009
GNOME Network Manager STILL 100% FAIL
Posted on 2:42 PM by Unknown
Almost a year ago I wrote about WICD for the first time. Mostly out of frustration for how badly Network Manager SUCKED. Well, nine months later I'm writing about WICD again, and again its due to Network Manager FAIL. My office uses an WPA+TKIP access point... this is pretty standard stuff... but Network Manager COULD NOT ASSOCIATE ME TO THE AP!!!! O-M-F-G!? So long as that hunk of shit is the default network manager in Ubuntu, Mint, Arch, etc., Linux will not gain widespread acceptance. WICD FTW!!!!!!!!!!
Sunday, February 8, 2009
A trip to the library...
Posted on 10:04 PM by Unknown
Amanda (The Queen) shared with me an interesting statistic she had read: that homeschoolers are responsible for approximately 40% of the books checked-out from libraries. HOLY CRAP! 40% I didn't believe her...until today, when we went to the library.
The boys are studying medieval times in school along with the military lessons I've been working with them on (to my shame, I've been doing a poor job of that!) SO, Amanda located the correct section at the library and, as near as I can tell, checked-out every book on the subject.
I kid you not, we must've checked out just shy of 50 books today. Its staggering. Those kids will know about the medieval times! If not through simple osmoses...
The boys are studying medieval times in school along with the military lessons I've been working with them on (to my shame, I've been doing a poor job of that!) SO, Amanda located the correct section at the library and, as near as I can tell, checked-out every book on the subject.
I kid you not, we must've checked out just shy of 50 books today. Its staggering. Those kids will know about the medieval times! If not through simple osmoses...
Saturday, February 7, 2009
So long Vista, and thanks for all the...fish?
Posted on 8:14 AM by Unknown
I installed Vista Enterprise about four months ago in an attempt to familiarize myself with it for work... though no one intentionally sends me out to do Windows support anymore, it does happen on occasion. As such, I felt I needed to be familiar enough with Vista to actually support it. That said, the last four months have been a living hell. Between the `explorer.exe` hangs, hideous performance, and learning-curve, I've come to loath Vista even more than most. SO, last night I installed Linux Mint 6. Oh the joy.
This install was on my HP Compaq nx9420, which I've had for a couple of years. Its a great box and has served me very well. Unfortunately, the nx9420 still isn't an install and go platform. There are issues you have to address that I've documented in the Ubuntu Wiki page for the nx9420. The most glaring issue is, of course, that suspend to ram doesn't work out of the box. From a support perspective, everything else seems to be dandy, you just can't suspend.
Unfortunately, Stephan Graber has changed his website and as a result there is a broken link in my wiki entry for his hp-s2ram.patch. SO, I had to do a fair bit of digging to find it. :-\ I have found it, and it can be downloaded here, as well as a mirror I've put up on my site, here.
Other than having to fix suspend, everything seems to work dandy. Any other nx9420 owners out there that would like to contribute their tips are free to contact me at coreyjsteele_a.t_gmail.com.
This install was on my HP Compaq nx9420, which I've had for a couple of years. Its a great box and has served me very well. Unfortunately, the nx9420 still isn't an install and go platform. There are issues you have to address that I've documented in the Ubuntu Wiki page for the nx9420. The most glaring issue is, of course, that suspend to ram doesn't work out of the box. From a support perspective, everything else seems to be dandy, you just can't suspend.
Unfortunately, Stephan Graber has changed his website and as a result there is a broken link in my wiki entry for his hp-s2ram.patch. SO, I had to do a fair bit of digging to find it. :-\ I have found it, and it can be downloaded here, as well as a mirror I've put up on my site, here.
Other than having to fix suspend, everything seems to work dandy. Any other nx9420 owners out there that would like to contribute their tips are free to contact me at coreyjsteele_a.t_gmail.com.
Saturday, January 3, 2009
PG2 on Vista
Posted on 1:17 PM by Unknown
I had a bugger of a time getting PeerGuardian2 to work under Vista. SO, I figured I'd document my solution for others so they don't have to experience what I experienced. The biggest problem is that there are like twenty-thousand people out there that THINK they can show you how to use PG2, but most of the time they're completely wrong. That said, here's how I did it:
...the batch file is how you will launch PG2, not by any other means. That's it. It works like a champ.
- Uninstall any instances of PG and/or PG2 that you presently have installed.
- Make sure the "C:\Program Files\PeerGuardian2" directory is COMPLETELY empty.
- Download and install PG2-RC1 from PhoenixLabs.
- Go through the on-screen dialog
- Create a batch-file that includes the following:
del /Q "C:\Program Files\PeerGuardian2\cache.p2b"
del /Q "C:\Program Files\PeerGuardian2\history.db"
del /Q "C:\Program Files\PeerGuardian2\lists\*"
start "C:\Program Files\PeerGuardian2\pg2.exe"...the batch file is how you will launch PG2, not by any other means. That's it. It works like a champ.
Subscribe to:
Posts (Atom)
